Connect two Honda lightweight, super-quiet EU2000i generators to power larger loads such as RV water heaters and A/C units. This parallel kit offers an affordable, convenient power solution for operating appliances or lights while camping or during a power outage at home.

Features:

We use the same, identical, UL approved parallel operation cables as Honda with the factory molded ends that plug into your EU2000i generators and along with a factory molded UL approved, weatherproof, RV receptacle in the middle which will plug directly in to your 30 amp RV cord without any adapters! (Molded ends will help reduce power loss, over time, from rust and corrosion.)

Hook-up with Honda's parallel operation technology is so simple that you could almost do it blindfolded. You just plug the cable ends into the generator's parallel operation ports and then hook up the ground wire.It doesn't matter which way. The plug ends on the parallel operation cables are not color coded because its the electronics in the generator, not the outlets or the cable, that set the polarity.What could be simpler!

Our new premium parallel operation cables!! We use the same, identical, UL approved parallel operation cables as Honda with the factory molded ends that plug into your EU2000i generators, along with a UL approved, weatherproof, RV receptacle in the middle which will plug directly in to your 30 amp RV cord without any adapters! (Moulded ends will help reduce power loss, over time, from rust and corrosion. Authentic Honda Parallel Cables are covered with a polypropylene mesh that protects against abrasion, giving your cable a longer life

Hook-up is so simple that you could almost do it blindfolded. Just follow the easy step-by-step instructions that come with our parallel cable, and you will be up and running in no time. As an added bonus to make our parallel cable setup even easier, we include a set of thumb screws to replace the philips head ground screws that come standard on Honda EU2000i generators. This means that our parallel cable setup is the first and only to require no tools for setup and disassembly!

Theses cables are designed to connect 2 same model Honda Generators together in parallel to give you the ability to SURGE the watt/amp's of the 2 paralleled generators. These cables work fine for starting surge loads like an air conditioner or air compressor but are some what restrictive because of the15/20amp receptacle on the generator that you plug into.To have the ability to continuously access the full power your 2 generators are capable of, please refer to the 2 products listed above.